Supporto Tecnico / Technical Support
Bollettino Informazione Tecnica /
Technical Information Bulletin
data /
date
codice
-
progr./
code - number
TIB
22/05/14
808457
02
4 / 6
Modulo IO-TIB-A (Liv.06)
INFORMAZIONI RISERVATE, DA DIVULGARE SOLO SU AUTORIZZAZIONE DEL “SUPPORTO TECNICO”
CONFIDENTIAL INFORMATION ONLY TO BE DISCLOSED WITH PERMISSION FROM “TECHNICAL SUPPORT”
[Replacement procedure of the paper conveying actuator]
No.
Procedure
Details
1
Detach the following exterior covers while
referring to the Service Manual.
(The table to the right indicates the applied
pages.)
Description
Pages
Right lower cover
1-5-2 (4)
Right lower rear cover
1-5-2 (5)
Right lower front cover
1-5-2 (6)
2
Disconnect the connector at the machine
right rear side (x3) and remove the
connector wires from the wire saddle.
3
Remove the screw fixing the paper
conveying guide (x2).
4
Pull the front side of the paper conveying
guide (Note1) and then remove the stop
ring and the bushing.
(Note 1)
Note that the paper conveying guide may
be deformed if forcibly pulled.
Slightly pull it out until the paper conveying
guide naturally stops.
