manualshive.com logo in svg

Olivetti d-Copia 20, Руководство по эксплуатации

Поделиться
Скачать
Olivetti d-Copia 20 Скачать руководство пользователя страница 2

PUBLICATION ISSUED BY:
Olivetti 

Tecnost

, S.p.A.

Direzione Home/Office

Via Jervis, 77 - 10015 Ivrea (ITALY)
www.olivettilexikon.com

Copyright © 200

1

, Olivetti

All rights reserved

March

 200

1

The manufacturer reserves the right to carry out modifications to the product described in this manual at any time

and without any notice.

The ENERGY STAR program is an energy reduction plan introduced by the

 

United States Environmental Protection

Agency in response to environmental issues and for the purpose of advancing the development and utilization of
more energy efficient office equipment.

 ENERGY STAR is a U.S. registered mark.

The auto-shut-off time setting is between 15 and 120 minutes in the areas corresponding to the 

Swiss Energy 2000

Program area.

Your attention is drawn to the following actions which could compromise the conformity attested to above, as well
as the characteristics of the product:

•

incorrect electrical power supply;

•

incorrect installation, incorrect or improper use or use not in compliance with the warnings provided in the
User’s Manual supplied with the product;

•

replacement of original components or accessories with others of a type not approved by the manufacturer, or
performed by unauthorised personnel.

This product’s conformity with quality requirements
is certified by the        Mark it bears, in accordance
with the 1999/05/EC standard. 

This machine has been approved, under the terms of Council Decision 98/482/EC, for Europe-wide connection
as a single terminal to an analogue Public Switched Telephone System (PSTN) system. However, due to differences
between individual PSTNs in the various countries, the approval does not unconditionally guarantee success
operation of every PSTN termination point.
If you encounter any problems, you should contact your supplier immediately.

Network compatibility declaration
This product has been designed and developed to operate in the networks of all European Community countries,
and in those of Switzerland and Norway.
Full compatibility with the networks of individual countries will depend on specific national software parameters
which can be set in the product. If you encounter problems with non EC PSTN networks, contact your national
technical support service.

Содержание d-Copia 20










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды