Olivetti d-Copia 1800MF, Руководство по установке

Страница: 26 / 33

Performing the Required Operation at the Scanner
3-5
When performing the scanning operation at your computer
1 Run the TWAIN Source in the corresponding application. The main dialogue box for the TWAIN
Source will appear. Make any settings that you want, and put a check mark in the
[Waiting Scan]
checkbox.
2 Click on the [Connect] button in the main dialogue box and, once the connection to the scanner is
made, click on the [Scan] button.
Note
Putting a check mark in the [Waiting Scan] checkbox will allow you to start the actual scanning
operation by pressing the Start key at the scanner.
3 Set the original that you want to scan in the scanner
and press the
Start key. Scanning will begin.
Notes
• Scan settings can also be made on the operation panel of the scanner. Change any settings
there that you want.
• If you enter different settings in your computer and in the scanner, the settings made on the
operation panel of the scanner will take priority.