background image

Troubleshooting 

4-3

Print Quality Problems

The tables and diagrams in the following sections define print quality 
problems and the corrective action you can conduct to solve the 
problems. Some solutions may require cleaning or replacing parts of the 
printer.

If the suggested corrective action will not solve the problem, call for 
service.

Printed Results

Corrective Action

Skewed-color printout

Conduct color registration using the printer operation panel.
For details, refer to 

Registration Normal (Color registration [standard])

 

section or 

Registration Details (Color registration [detailed])

 section of the 

Advanced Operation Guide

.

Completely blank printout

Check the toner containers.
Open the printer top cover (top tray) and check that the toner containers 
are correctly installed in the printer. For more information on installing the 
toner containers, refer to 

Toner Container Replacement on page 3-2

.

Check that the application software is correctly operated.

Full single-color printout

Check the main charger unit.
Open the left cover and check that the main charger unit is correctly 
installed.

Dropouts or stray dots

Clean the main charger units.
For details, refer to 

LSU/Charger

 

(LSU/Main charger cleaning mode 

setting) 

section of the 

Advanced Operation Guide

.

Содержание d-Color P221















































































Отзывы: