Olivetti d-Color MF 4003 Скачать руководство пользователя страница 86

Страница: 86 / 688

d-Color MF4003/MF3303

E MAINTENANCE > 3. Periodical replacement procedure

E-10

[2]

[1]

Hold the both handles [1], and remove the waste toner bottle [2].

Clean the surface around the waste toner collecting port.

E.5.1.10 Cleaning of the area around the waste toner collecting port

Reinstall the above parts following the removal steps in reverse.

3.1.10 Replacing the transfer belt unit

(1) Removal procedure

Remove the toner cartridge.

E.3.1.6 Replacing the toner cartridge

Remove the waste toner bottle.

E.3.1.9 Replacing the waster toner bottle

Remove the imaging unit.

E.3.1.7 Replacing the imaging unit

Remove the IDC sensor assy.

F.4.7.1 IDC sensor (IDCS1)

[1]

Remove two screws [1].

[1]

Hook two transfer unit pressers [1] on the fusing unit.

[1]

[2]

Hold the handle [1] of the transfer belt unit, and pull it out.

NOTE

▪ Make sure not to drop or lose the plate nut [2].

Service Manual

Y119930-3

Содержание d-Color MF 4003
















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание d-Color MF 4003

Отзывы:

Olivetti d-Color MF 4003, Руководство по обслуживанию, Страница: 86 / 688

Результаты поиска

Содержание d-Color MF 4003

Отзывы: