Olivetti d-Color MF 4003, Руководство по обслуживанию

Страница: 85 / 688

d-Color MF4003/MF3303
E MAINTENANCE > 3. Periodical replacement procedure
E-9
6. NOTE
▪ When installing the imaging unit, completely push it in.
7. NOTE
▪ When installing the imaging unit, be sure to tighten the screws from
(1) to (2) in that order.
▪ Otherwise, it may cause a color shift or magnification shift in the
main scanning direction.
8. To reinstall, reverse the order of removal.
9. Select [Service Mode] -> [Machine] -> [Color Registration Adjustment] to adjust the value for correcting the color shift to 0.
10. Select [Service Mode] -> [Imaging Process Adjustment] -> [Stabilizer] -> [Init Image Stabilization] and perform the function.
11. Select [Service Mode] -> [Machine] -> [Main Scanning Direction Zoom] to adjust the zoom in main scanning direction.
12. Select [Service Mode] -> [Imaging Process Adjustment] -> [Stabilizer] -> [Stabilization Only] and perform the function.
13. Repeat the step 10 and 11 until the Main Scanning Direction Zoom Adjustment is met.
14. Select [Service Mode] -> [Machine] -> [Color Registration Adjustment] and perform the adjustment for correcting the color shift.
15. Select [Service Mode] -> [Machine] -> [Printer Area] -> [Printer Image Centering Side 1] to adjust the side of print position for each paper
source.
16. Select [Service Mode] -> [Machine] -> [Printer Area] -> [Prt. Image Center. Side 2 (Dup)] to adjust the side of 2-sided print position for each
paper source.
3.1.8 Replacing the toner filter
[1]
1. Pull out the toner filter [1].
[2]
[1]
2. Unhook the tab [1], and remove the toner filter [2].
3. To reinstall, reverse the order of removal.
4. Select [Service Mode] -> [Counter] -> [Life] and clear the count of [Toner Filter].
3.1.9 Replacing the waster toner bottle
1. Open the front door.
Y119930-3 Service Manual