Olivetti d-COLOR MF 2400, Руководство пользователя

Страница: 58 / 123

Specifying Multiple Recipients 3-16
Sending a Fax to Multiple Recipients (Group Dial)
Multiple destinations can be selected with a group dial destination.
d
Multiple destinations must have been previously registered with a
group dial destination. For details, refer to “Registering a Group Dial
Destination” on page 6-8.
1
Press the
Addressbook
key three times.
d
The
Addressbook
key can be used if the main screen or [Can Use
AddressBook] is displayed.
2
Use the keypad to type in the group dial number(1-20), and then press
the
Select
key.
d
If a number was incorrectly entered, press the
Back key
, and then
type in the correct number of the group dial destination.
d
If the entered group dial number is not registered with a fax num-
ber, the message [NOT FAX NO.] appears. In addition, if the
entered group dial number is not registered with a recipient, the
message [NOT REGISTERED!] appears. Enter a group dial num-
ber registered with a fax number.
3
When [OK=Select] appears, press the
Select
key again.
4
Press the + or , key to select [FINISH], and then press the
Select
key.
d
To erase the selected destinations, press the
Stop/Reset
key.
5
Press the
Start
key.
The document is scanned, and then the fax is sent.
d
To stop the transmission, press the
Stop/Reset
key. A message
appears, requesting confirmation to cancel the setting. Select
[YES], and then press the
Select
key. If this is done, all selected
recipients are cleared.
d
If [FAX TX] in [ADMIN. MANAGEMENT]/[PASSWORD SETTING]/
[FULL FUNC. NO.] has been restricted, type in the number speci-
fied for [FULL FUNC. NO.] after pressing the
Start key.