E-12
21. Adjusting each option
If any of the following options are installed, adjust
each option as necessary. (Refer to the “Adjustment
procedures” of the installation manual for each
option.)
• Paper Feed Cabinet PC-410/PC-210/PC-110
• Large Capacity Unit LU-302
• Dual Scan Document Feeder DF-704
• Reverse Automatic Document Feeder DF-629
• Finisher FS-534SD
• Punch Kit PK-520/PK-519
22. Affixing the paper size label
Affix the paper size labels that correspond to the
sizes of paper used in each tray.
See the User's Guide CD for instructions on setting
paper in each tray and configuring the paper types.
23. Installing the user’s guide holder
Install the user’s guide holder.
24. Affixing the panel sheet
Affix the supplied panel sheet to the surface of the
operation panel.
Note:
• The panel sheet is affixed on customer request.
• The panel sheet must be kept by the customer.
Note:
After completing all the steps, take a sample
copy in color mode, and confirm the image. If
image troubles occur, first turn OFF and ON the
Main Power Switch, and then redo the steps
from E-9 “13. Date & Time Setting/Time Zone
Setting (Service Mode)” to E-9 “15. Unit change.”
Paper size label
