Oliver MODEL 619-16, Руководство пользователя по эксплуатации и инструкция

Страница: 10 / 36

0619S20149-
2
*********W A R N I N G******
UNPLUG MACHINE
USING THE ACCESS DOORS ON BOTH SIDES OF THE UNIT
PULL DOOR UP, USE ONE HAND TO HOLD DOOR UP
WIPE DOWN MACHINE WITH OTHER, USING A RAG
OR A BRUSH
Lubrication
The machine requires no lubrication but the oil level in the hydraulic system should be checked
periodically. To check the oil level remove the rear cover by removing the four knobs which
secure it to the divider, then remove the tank breather/cap and determine where the top of the oil
is in relation to the top surface of the tank. Fill with oil to within approximately one inch of the
top surface. If necessary add
HYDRAULIC OIL
to return it to the proper level,
DO NOT
OVERFILL
. In addition to the above we advise replacing the hydraulic oil in the system
approximately every three years.
Hydraulic Oil Specification
The hydraulic oil used in your divider should be made of good quality base stocks compounded
with the following additives: anti-wear, anti-oxidation, antifoaming, and antirust. In addition it
should be an
“ISO” viscosity grade No. 32.
Rev. 7-30-02