Oliver 702-N Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 24

Oliver 702-N Скачать руководство пользователя страница 12

MODEL 702-N, 702-NSE and 702-NSS BUN SLICERS

0702S20039

TROUBLE SHOOTING

WARNING

NEVER ATTEMPT TO CLEAN OR SERVICE THIS MACHINE UNTIL

IT HAS BEEN DISCONNECTED FROM THE POWER SUPPLY AND

YOU ARE SURE THE BLADE HAS STOPPED.

THE SLICER MOTOR WILL NOT START OR WAS RUNNING BUT SUDDENLY
STOPPED.

•

Check to see if the machine's plug was accidentally removed.

•

If plugged in, is the outlet working? Test it with another, working, small appliance.

•

Your slicer’s motor is equipped with a thermal overload. Should the motor become

overheated it will stop. (See “Resetting the Thermal Overload” below)

•

If you still can not find the problem have a qualified electrician check the unit's motor

and switch.

RESETTING THE THERMAL OVERLOAD

•

To restart the machine allow the motor to cool for approximately one to two hours.

Then carefully tip the machine to one side so that you can press the red reset button
which is located on the end of the motor. Press the button FIRMLY. Return the
machine it’s proper position, connect it to the power supply and attempt to restart the
machine.

NOTE

ATTEMPTING TO START THE MACHINE AFTER PRODUCT HAS BEEN

INSERTED IN THE MACHINE OR ATTEMPTING TO CUT PRODUCT

WITH A DIRTY BLADE MAY CAUSE OVERLOADS.

«
...
10
11
12
13
14
...
»

Содержание 702-N

























Отзывы:

Нет отзывов