Oliver 6510, Руководство пользователя

Страница: 15 / 38

4. OPERATION 4-5
4.2.3. Adjustment of indent height “H”
Choose on spindle shaft (A) the desired height. The lowest value of 6 mm. is
obtained by positioning the mill cutter on the first notch to the left of the scale, identified
with minus (-) sign, and lock the setscrew (B). Each notch of the scale will increase the
indent height of 1 mm. (Every time the mill cutter is shifted of one indexing clockwise (+)
sign, the spindle assembly must be raised of 1 mm. acting on the adjustment shaft (C)
to maintain the same indent accuracy. Lock in position with screw (D).
4.2.4. Adjustment of male indent thickness "S"
Position the support of mobile chaser (A) to the limit stop backwards by operating
the start cycle push button. Remove cover, unlock screw (B), and adjust regulator (C)
with special tool and then lock.
D C
B A
B
C
A