Oliver 4240, Руководство пользователя, Страница: 11 / 22

11
Spiral Head Option
If you purchased a machine with the spiral
cutterhead (Figure 16), instructions for replacing
the knives are as follows.
Figure 16
1. Using an allen key, remove all the screws
‘A’, gib plates ‘B’, and knife ‘C’ as shown in
Figure 17.
Figure 17
2. Set the new knife on the cutterhead as
shown in Figure 18 by lining up the knife
tabs ‘A’ in the slot and the index holes ‘B’
with the holes in the cutterhead.
Figure 18
3. Starting in the middle of the knife, place the
gib plate on the knife and lightly screw in
one of the gib screws so that the knife tab
seats in the slot. Figure 19
Figure 19
4. Begin installing the rest of the gib plates
using the indexing tool (A, Figure 20) to
properly align the knife while tightening the
screws.
Figure 20
5. Repeat the above procedure for all the
knives while making sure to firmly secure all
screws.
6. Set the outfeed table as described on page
10.