Oliver 2019, Руководство пользователя

Страница: 17 / 56

2019 Lathe OLIVERMACHINERY.NET 17 | Page
Group 5: Outboard Turning Banjo (Optional)
Item Description QTY
14 Clamping Lever 1
15 Outboard Turning Banjo 1
NOTICE: If you cannot find an item in the list
above, please check if it is still attached to the
packaging or inside the cabinet. Occasionally, the
item may have been pre-installed at the factory.
Please refer to the parts list section in this
manual to ensure you have all the components
to set up this machine.
NOTICE: This machine comes with various
standard-sized, non-proprietary parts. If any of
these parts are missing, we are happy to deliver
them to you. To have the machine up and
running as soon as possible, you can also find
these parts at your local hardware store.
Additional Items Recommended for Assembly
Item Purpose
Safety Glasses Protection
Disposable Gloves Cleaning
Paper Towel / Rags Cleaning
Rust Inhibitor Rust protection.
Lifting Straps / Crane Lathe installation.
Cleaning
The cast iron lathe beds are covered with
machine oil and plastic film to prevent rusting.
Remove the plastic film, then wipe off the
machine oil with paper towels or rags.
After cleaning, routinely apply rust preventive
such as Boeshield® T-9 or paste wax. Do not use
rust preventives that contain silicone, which is
known to interfere with certain wood finishes
and glues.