Oliver 1708-N, Руководство пользователя по эксплуатации и инструкция

Страница: 8 / 19

1708 SELF-ACTUATING LIDDER
5/24/96 1708S20013
CLEANING
•
If the machine has been operating, allow the unit to cool before cleaning.
CAUTION
•
CAUTION HOT: The heater cover and upper platen are very HOT! Caution must be used to
protect yourself and others.
•
Make sure the unit has been unplugged from power and air before cleaning.
•
Clean the Self-Actuating Lidder with a mild cleaner and a damp cloth .
•
To clean or access the heated upper platen,
remove the pin on the right side of the arch
support and carefully rotate the entire arch
assembly counter clockwise. Do not release
the arch assembly until it is resting securely
against the arch stop. A round knob on the
right side of the arch support is provided as a
handle specifically for this task. Be sure that
the removable arch support pin is fully
engaged when replacing it.
CAUTION
•
MAKE SURE UNIT IS SECURE AND WILL NOT TIP OVER
•
Use an abrasive scrubbing pad and a mild cleaner to clean the heated upper platen.
•
To remove tray carrier slides for cleaning, remove tray carrier, press and hold the locking tab and
pulling slide completly out (refer to drawing below).