1308S20020
8-1
TROUBLE SHOOTING
SYMPTOM
CORRECTIVE ACTION
Poor seal quality
Verify that the platen is heated and is at the correct
temperature (approximately 300
F/150°C)
Check to see if the platen is dirty
Check rubber gasket on tray holder for
damaged or missing pieces
______________________________________________________________________
Platen does not heat up
Verify that the power cord is plugged into outlet
Verify that there is power at the outlet
For models with a switch, verify the switch is in
the "on" position with the
red
light on the switch
illuminated
_____________________________________________________________
Film sticking to heater
Film is coming off the roll the wrong direction or
improper threading (feed from top).
______________________________________________________________________
Shredding film
Seal time or pressure needs to be adjusted.
Oliver Packaging & Equipment Company
y
3236 Wilson Drive NW, Walker, MI 49534
(800)
2
53-3893
