Oliver 10060, Руководство пользователя

Страница: 14 / 46

14 |
Page Oliver Machinery 10060/10061 Drill Press
Setup
Shop Preparation
Space Requirement
The dimensions of 10060 Drill Press and 10061 Drill Press are 38-1/2”(H) x 14”(W) x
23”(D) and 61”(H) x 14”(W) x 23”(D) respectively. You will need additional space for
manipulating your workpiece, electrical connection, and dust collection.
Load Limits
This series of drill presses can weigh up to 121 lbs. Please ensure all lifting tools and
structures have adequate load capacity, for transporting and supporting the total
weight of this machine, the operator, and related items.
Electricals
Ensure a properly sized circuit is nearby the machine. If the machine is to be hardwired, there must be a
readily accessible power disconnect nearby, so that the machine can be disconnected from the power
source for servicing and adjustments. If the machine is to be connected with a cord and a plug, please
ensure a matching outlet is installed nearby.
Please refer to section “Electricals” in this manual for details regarding electrical requirements.
Lighting
Adequate lighting is needed for operating this machine. Overhead, non-glare lighting should be installed.
Safety Labels
If this machine introduces a new safety hazard to your workplace, display proper warning signs in highly
visible locations.
Dust Collection
Wood dust is a health hazard and can be reduced by using a dust collection system. Check air suction of
the dust collection system regularly to ensure filters and pipes are not clogged.
Dust masks should be available for using the drill press.