Oliver 10044, Руководство пользователя

Страница: 20 / 52

20 |
Page Oliver Machinery 10044 Planer
Dust Collection
This wood planer can generate a lot of wood shavings and dust. Although this planer is equipped with an
internal dust blower, it is still a good idea to connect this planer to a dust collection system, so all dust
and wood chips can be effectively removed and contained.
The minimum CFM requirement for this planer is 300 CFM at the dust port, which means your dust
collection system should have a rating greater than 300 CFM, as air friction and leakage reduce effective
CFM at the dust port.
This planer comes with a 2-1/2” dust port adapter which is compatible with a standard-sized vacuum
hose. It is possible to connect this planer to a vacuum with good suction for light-duty tasks.
Bench Mounting (Optional)
Mounting this planer on a stable surface prevents it from tipping when planing long stock. The diagram
below has the measurements of the planer base and the mounting holes. Using four 9/16” bolts for
mounting provides maximum strength and stability. Alternatively, there is another set of four mounting
holes that accept screws up to size #10.
IMPORTANT
Running this planer without a dust collection system, or using a dust collection
system with inadequate suction, may cause dust and shavings to accumulate
inside the planer. This can damage the machine and cause other hazardous
situations. Check your dust collection system regularly to make sure it is not
jammed or filled up.
When using this planer without a dust collection system, make sure wood chips
are not getting accumulated inside the machine. Clean planer frequently.