Oliver 0006, Руководство пользователя

Страница: 6 / 24

5
Installation Motor & Switch
Step 4: Put the motor & switch assembly on the
Motor Bracket (D) and lock by Shoulder Screw
(E)*4 & Hex. Nut (F)*4 but not tighten all screws.
Warning: The motor & switch assembly is
heavy. Do not assemble motor by yourself; ask
someone to help is required.
Step 5: Place to switch into the rectangle hole
on stand-right and tighten by 2 Round Head
phillips screw w/teeth washer (L)
Step 6: The plug (M) need to pass through the
round hole on the stand-right and fix the power
Fixing plate (O) by Round Head phillips screw
w/flat washer (N)* 2
Installation Jointer Body & Stand
Step 7: Put a large clean carton
board or plastic paper
on the floor to protect the jointer table top surface.
Step 8: Turn over the jointer Body then put the stand
of step 6 to the jointer base by 3 Hex. Screw
w/washer 3/8” x16NCx3/4” (P) but not tighten all
screws
Warning: The jointer body & stand are heavy.
Be careful and asking help when needed.
Installation V-Belt
Step 9: To attach the V-belt over cutterhead pulley
and motor pulley.
Stand-Right
Switch
L
Stand-Right
M
O
N
Motor
E
F
D
Jointer Body
Stand
P
V-Belt