Step 1: Place diffuser on a flat
surface and remove ceramic
cover and cap.
Step 2. Turn upside down to
connect DC adapter into diffuser.
Do not plug into mains until
fully filled and assembled
in case of any spillages.
Step 3. Turn back upright, placing
on a flat and level surface.
Fill a measuring cup with
90-100ml of water and add to
water tank. Make sure not to
exceed the max fill line.
Add with 2-3 drops of essential oil.
Step 4: Replace cap and ceramic
cover. Make sure both the cover
and cap air outlet are aligned.
Plug adapter into mains.
MIST BUTTON
Press once
Power on, mister will operate for
30 minutes
Press twice
Mister will operate for 1 hour
Press three times
mister will operate for 2 hours
Press four times
mister will operate for 3 hours
Press five times
mister will power off
LIGHT BUTTON
Press once for white light
Press twice for red light
Press three times for blue light
Press four times for green light
Press five times for purple light
Press six times for yellow light
Press seven times for blue light
Press eight times for white light
Press nine times for light off
CLEANING
Always unplug the diffuser before cleaning.
When emptying any excess water, ensure that poured
from the draining side, as marked on the water tank.
Clean inside regularly with a clean, soft,
dry cloth to remove any impurities
INSTRUCTIONS
Please retain these instructions for future reference
OPERATIONS
