4
DAMP LOCATIONS
Remote control: (Figure 5)
Figure 5
1. Plug the heater into outlet and open the power switch on the side of the unit base.
2. Press the POWER button will start the heater.
3. The MODE, TIMER and OSC. buttons function in the exact same manner as listed in steps
3 through 7 of the operating instructions listed above.
4. When press any button once, the indicated light on remote will flash once.
5. The remote control is powered by two AAA batteries. There is a cover on the back of the
remote control that can be removed for replacement of the batteries as required.
SAFETY FEATURES
1. This heater is equipped with a thermal overload protector. If the overheat temperature is
reached, the heater will be automatically shut off. It can only resume operation when the
user resets the unit. (See
RESET INSTRUCTION
below)
RESET INSTRUCTION
1. Unplug the heater and wait 10 minutes for the unit to cool down.
2. After the 10 minutes, plug the unit in again and operate normally.
