Olimpia splendid DOLCECLIMA SILENT S1 10P, Инструкция по установке, использованию и техническому обслуживанию

Страница: 75 / 284

DOLCECLIMA SILENT S1
ENGLISH
EN - 31
4.1 - CLEANING
4.1.a - Cleaning the appliance and the remote control
a
. use a dry cloth to clean the appliance and the remote control.
b
. it is possible to use a cloth moistened with cold water to clean the appliance in case it’s very dirty.
Do not use a chemically treated or antistatic cloth to clean the appliance.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the plastic surface.
4.1.b - Cleaning the suction filter
To ensure the indoor air is filtered correctly and to guarantee that your air conditioner runs efficiently, it is vital
to clean the air filters (23) regularly (Fig.19).
after a certain amount of time this important maintenance operation must be carried out. it is indicated when
the Fi alarm message appears on the control panel display.
a. Switch off the conditioner and then remove the filters (23) from the conditioner as indicated in figure 19.
b. Wash the filter (23) with a water jet aimed at the side opposite the accumulation of dust.
c. If the dirt is particularly difficult to remove (such as grease or other types of deposit), first immerge the
filter in a solution of water and a neutral detergent.
d. Shake off any water before reinserting the filter.
Provide for the filter (23) replacement if it is damaged.
e.
Make sure the filter (23) has dried completely.
f.
Correctly reposition the filter (23) in its specific seat.
g.
Suck possible fluff from the grille (Fig. 20).
Do not use the appliance without the filter (23).
4.1.c - RECOMMENDATIONS FOR ENERGY SAVING
Below find simple recommendations for reducing consumption:
• Always and constantly keep the filters clean (see maintenance and cleaning chapter).
• Keep the doors and windows of the rooms to be climate controlled closed.
• do not let sun rays penetrate freely into the room (we recommend using curtains or lowering blinds or
closing the shutters).
• Do not obstruct the air flow path (input and output) of the appliance; this, in addition to obtaining a non-op -
timal yield, also affects the correct operation of the appliance and the possibility of irreparable damages to
the appliance itself.