Make sure your mobile device is connected to the
same Wi-Fi
network
you want to use to connect the
FRESCO
portable AC.
1.
“
Log-in
” to the OS Home app using previously setup email and password,
then agree to Privacy Policy and User’s Agreement. (Fig. 3)
2. Choose device to add in OS Home App
1)
Click on “
Add Device
” or “
+
” in the top right-hand corner. (Fig. 4)
2)
Select “
Dolceclima Fresco
”. (Fig. 5)
Figure 3
Figure 4 Figure 5
Activate/reset WiFi function using FRESCO touch panel display
3
Connect the power cord of the appliance to the power socket;
then turn on WiFi function for network configuration.
Activate
or
reset
the WiFi function by pressing & holding Fan/Wifi Mode
(SW6) button for approximately
5 seconds
until the LED (S10) starts to
blink. (User’s Manual sec. 3.12)
Follow step-by-step directions on the
OS Home App
to connect
to FRESCO for network setup.
S10
SW6
Please connect using 2.4GHz network. To set router to 2.4GHz, please click
on “Common router setting method” in the following step to select
network and provide password.
Connecting FRESCO to your network using OS Home App
4
