Olimpia splendid AQUARIA 18 P, Инструкция по установке, использованию и техническому обслуживанию

Страница: 53 / 147

ENGLISH
EN - 23
7 - TROUBLE SHOOTING
BEFORE CALLING FOR SERVICE
Before contacting professional service, consult this list.
This list includes common occurrences that are not the result of a defect in workmanship or materials.
PROBLEM POSSIBLE CAUSES ADVISED SOLUTIONS
The unit doesn’t operate
The supply cord is disconnected Insert the plug in the power socket and
make sure there’s electrical voltage
The tank full warning led is turned on
(tank full or not correctly positioned)
Drain water tank and reset your setting,
or replace the water tank to right place
Room temperature exceeding the
maximum work conditions of the
appliance
Self-Protection designed to protect
the unit. Can not work under such
temperature
The dehumidifying
function doesn’t work
or the unit turn on / off
frequently
Air filter is clogged Clean the air filter
Door or window open Close the door and/or the window
The air inlet/outlet grilles are clogged Remove the obstruction or clean the air
inlet/outlet grilles
The set level of humidity is higher than
the level of humidity in the room
Set a level of humidity lower than the
level of humidity in the room
Water leak
The water tank is too full Empty the water tank
The rubber hose is bent Position the hose correctly in order to
avoid the return of water
Operation is noisy
The unit is tilted or unsteady Place the appliance on an even, solid
surface (less vibration).
Air filter is clogged Clean the air filter
The display shows E1 Temperature sensor faulty Call the service center
The display shows CL
Room temperature lower than 5°C
(41°F).
This is normal.
The compressor stops and the fan
keeps running.
The display shows CH
Room temperature higher than 35°C
(95°F).
This is normal.
The compressor stops and the fan
keeps running.
The display shows LO
Level of humidity in the room lower than
20%.
This is normal.
The compressor stops and the fan
keeps running.
The display shows HI
Level of humidity in the room higher
than 95%.
This is normal.
The compressor stops and the fan
keeps running.
Low temperature operation with Auto Defrost function
The appliance is equipped with an automatic defrost function (indicated by the specific led “ POWER ” switching on) which,
thanks to opportunely timed intervals and by checking room temperature, adjust the machine operation.