Olimpia splendid 2261, Быстрый старт

Страница: 4 / 5

3
.
Confirm that Wifi function LED (S10) is on and blinking rapidly.
4. Click on “ Confirm indicator is blinking rapidly ”. (Fig. 6)
5. Click on “ Blink Quickly ”. (Fig. 7)
6. Confirm network and enter network password then “ Next ”. (Fig. 8)
Figure 6 Figure 7 Figure 8
When the FRESCO is connected to the WiFi network, the Wifi function LED
(S10) stops blinking and remains switched ON steadily on the display.
Connecting FRESCO to your network using Smart Life App
4
S1
0
If resetting is necessary, refer to step on previous page to perform
a reset for the FRESCO.
3
Connecting FRESCO using Smart Life App – Alternate Method
4A
If unable to add FRESCO to Smart Life App, follow directions
below to connect using “ Blink Slowly ” option.
Do not cycle power by unplugging power cord from outlet.
1. Reset Wifi function LED (S10) to blink slowly by pressing & holding
Fan/Wifi Mode (SW6) button for approximately 5 seconds.
2. Click on “Confirm indicator is blinking rapidly”. (Fig. 9)
3. Click on “ Blink Slowly ”. (Fig. 10)
Figure 9 Figure 10
SW6
S1
0