OLIMEX© 2012
TMS320-XDS100v3 User's Manual
CHAPTER 1 OVERVIEW
1. Introduction to the chapter
Thank you for choosing the TMS320-XDS100v3 emulator from Olimex! This document provides a
user’s guide for the Olimex TMS320-XDS100v3. As an overview, this chapter gives the scope of
this document and lists the board’s features. The differences between the members of the TMS320-
XDS100v3 family are mentioned. The document’s organization is then detailed.
The emulator is based on design provided and distributed by Texas Instruments.
1.1 Features
•
TMS320-XDS100V3 hardware is designed to work with CCS 5.x software
•
IEEE 1149.7 capable emulator with a USB interface.
•
Can function as an 1149.7 adapter for use with existing scan controllers.
•
Support for ARM Ltd's Single Wire Output (SWO).
•
Software compatible with XDS100v2 (except link delay and IEEE 1149.7 modes).
•
Physical jumper to select emulator or adapter mode.
•
Operates in 1149.7 Class 4, up to 25MHz.
•
LED to indicate IEEE 1149.7 Class 4 operation.
•
LED to indicate operation in adapter mode.
•
Supported devices: TMS320C28xx, TMS320C54xx, TMS320C55xx, TMS320C674x,
TMS, TMS320C66x, ARM9, ARM Cortex A9, ARM Cortex A8, ARM Cortex
M3, ARM Cortex R4
•
Suitable for ARM 14 pin and ARM 20 pin layouts
•
Works with targets in the 1.65 – 5.0V range
•
Uses standard 0.1" 2x7 pin and 2x10 pin JTAG connector
•
No need for external power supply, all required power is taken from USB and the target
•
Dimensions 95x46 mm (3.75x1.8") + 2x15 cm (8") cables
For full list of features visit the TI's wiki address:
http://processors.wiki.ti.com/index.php/XDS100#XDS100v3_Features
Page 4 of 13
