OLIMEX© 2016
STM32-H405 user's manual
CHAPTER 2: BOARD DESCRIPTION
In this chapter you will get acquainted with the main parts of the board. Note the names used on the
board differ from the names used to describe them. For the actual names check the STM32-H405
board itself.
2.1 Layout (top view)
The picture below shows the top side of the board and highlights the most important parts.
Notice that all on-board jumpers are SMD type – in order to change the position of the jumpers you
would either need to cut between the pads of the jumper or solder the pads together.
Page 7 of 30
