OLIMEX SAM9-L9261 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 15

OLIMEX SAM9-L9261 Скачать руководство пользователя страница 10

17

NC

18

GND

19

NC

20

GND

PLAYING MULTIMEDIA

The default installation includes a command-line multimedia player. To
play audio or video start the media player giving the media files as
command line arguments:

mplayer song1.ogg
mplayer myvideo.avi

The sound volume can be controlled either from the GUI or by the
command-line ALSA application:

alsamixer

Volume channels are selected by the left and right arrow keys, values can
be changed with the up and down arrow keys, mute is controlled by the M
key, and the ESC key exits the application. Note that certain terminal
emulation programs cannot cope with the

alsamixer

output. HyperTerminal

is known not to work. PuTTY is known to work.

WARNING:

By default MPlayer uses the OSS sound interface. But

sometimes the OSS-emulation layer in ALSA does not work properly,
particularly in situations when the original sound stream must be down-
sampled. In these cases the sound will be distorted. MPlayer can be forced
to use ALSA with the

-ao alsa

command line argument:

mplayer -ao alsa song1.ogg

WARNING:

If colors seem to be messed up then MPlayer is not using 24bpp

color depth for the frame buffer. Fix that by forcing the video output driver
to SDL:

export DISPLAY=:0.0

# in case we're on the ttyS0 console

mplayer -vo sdl myvideo.avi

USING THE SD/MMC SLOT

A few limitations arise when using the SD/MMC slot:

1. AT73C213 sound cannot work in Linux.
2. ADS7843 touchscreen cannot work in Linux.
3. Generic SPI cannot work in Linux.
4. Before and during booting the jumper AT/SD must be in position

“AT”. After Linux kernel is loaded and running, this jumper must be
placed at the “SD” position.

5. The SMD jumpers WP_E and CP_E must be soldiered.

6.

A specially configured version of the Linux kernel must be used. A
precompiled binary can be found in the

“sam9-l9261-samba-

sdmmc.zip” archive

. The configuration for this kernel can be loaded

in the kernel source tree with the following command

make sam9_l9261_sdmmc_defconfig

CAVEAT:

The AT91SAM9261 MCI controller has a few bugs which can

prevent it from working properly with some SD/MMC cards. Please consult
the chip errata for more information.

COMPILING USER APPLICATIONS FOR EMBEDDED LINUX

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

Downloaded from

«
...
8
9
10
11
12
...
»

Содержание SAM9-L9261
















Отзывы:

Нет отзывов