OLIMEX© 2012
OLinuXino-MAXI user's manual
the picture below for a better view how the three wires must be connected.
After soldering the three wires you can place a marker on each of them or use colored wires to be
able to distinguish them. You can also use some gel to keep them tight on the USB connector. On
the opposite side of the cables you might place 50mil (1.27mm) male connector following the order
of the signals. Please also restrain from using wires longer than 20 cm since that might make the
connection unreliable.
Download BitBurner from
https://www.olimex.com/dev/OLINUXINO/iMX233-
OLINUXINO/BitBurner.v1.0.4.6.zip
. Extract it and start the .exe. If you connect everything you
should see and choose HID-compilant device from the “Select device” drop-down menu.
Page 11 of 60