OLIMEX OLIMEXINO-STM32, Руководство пользователя

Страница: 4 / 20

ELECTROSTATIC WARNING:
The OLIMEXINO-STM32 board is shipped in protective anti-static packaging. The board must not be
subject to high electrostatic potentials. General practice for working with static sensitive devices should be
applied when working with this board.
BOARD USE REQUIREMENTS:
HARDWARE REQUIREMENTS:
- Cables: You'll need a USB cable with mini USB connector for connecting the board to a personal computer
and MAPLE IDE. The board also gets powered via this cable.
- ARM programing tool (optional but recommended): STM32-compatible programmer/debugger is
recommended:
1. if you wish to use a general-purpose approach of programming (not bootloader and USB method)
2. if you wish to change the bootloader with MPIDE bootloader
3. if you managed to overwrite the bootloader program and wish to recover the device
You can use any STM32F103 compatible programmer or debugger just notice that the board has a 10-pin
mini JTAG/SWD connector (0.05” step) – make sure that you have a suitable adapter. You can use ARM-
JTAG-20-10 adapter for this task.
Our ARM-USB-OCD-H , ARM-USB-TINY-H , ARM-JTAG-COOCOX tools are capable of
programming the board (remember the adapter).
SOFTWARE REQUIREMENTS:
- Environment (recommended)
By default the board comes with MAPLE IDE bootloader. It is recommended to use MAPLE IDE initially.
- Environment (recommended)
Since the MAPLE project is now completely abandoned it is recommended to either use an alternative
(MPIDE; Espruino IDE; stm32duino; etc) or use general-purpose method of programming.
It is important to notice that the STM32 chip has internal bootloader which can be used to change any code
without JTAG debugger. Please find instructions on how to use “STM32 Flash Load Demonstrator” in the
wiki article: https://www.olimex.com/wiki/How_to_use_OLIMEXINO-STM32_with_Espruino_IDE
Note that usually the general-purpose require a programmer or debugger in order to interact with the board.
Page 4 of 19