OLIMEX LPC-E2468, Руководство пользователя

Страница: 15 / 19

TXD1 Output Transmit Data. This is the asynchronous serial data output (RS232) for the
RS232 interface.
RXD1 Input Receive Data. This is the asynchronous serial data input (RS232) for the
RS232 interface.
SCL0 I/O Serial (Synchronization) Clock. This is the synchronization clock for
the data transfer through I2C interface. This could be either input or output depending on
whether the MCU is master or slave.
SDA0 I/O Serial Data. This pin is data input or output (depending on the data
flow direction) for the I2C interface.
MISO I/O Master In Slave Out. This pin could be either data input (MCU is
master) or data output(MCU is slave). The signal is pat of the SPI interface.
MOSI
I/O
Master Out Slave In.
This pin is be used for communication through
SPI interface and it is either data output from the MCU (when it is master) or data input for
the MCU (when it is slave).
SCK I/O Serial (Synchronization) Clock . This is the synchronization clock
for the data transfer through the SPI interface. It could be either input or output depending
on whether the MCU is master or slave.
SSEL
I/O
Slave Select.
This is the slave select signal for the SPI interface. If the
MCU is master, this is output. If the MCU is slave, this signal is input.
LAN:
Pin # Signal Name Chip Side Pin # Signal Name Chip Side
1 TD+ 5 Not Connected (NC)
2 TD- 6 Not Connected (NC)
3 3.3V 7 RD+
4 Not Connected (NC) 8 RD-
LED Color Usage
Right Yellow Activity
Left Green 100MBits/s (Half/Full duplex)
TD-
OutputDifferential signal output. This signal is output from the MCU.
TD+
OutputDifferential signal output. This signal is output from the MCU.
RD- Input Differential signal input. This signal is input for the MCU.
RD+
InputDifferential signal input. This signal is input for the MCU.