OLIMEX© 2015
iMX233-OLinuXino-NANO user's manual
CHAPTER 8 SCHEMATICS
8. Introduction to the chapter
In this chapter are located the schematics describing logically and physically OLinuXino.
8.1 Eagle schematic
OLinuXino schematics may be found it on the OLinuXino's GitHub repository:
https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE/iMX233-OLinuXino-NANO
.
You can download the whole repository as .zip without having a GitHub account.
We use mostly Eagle by Cad Soft 4.16r2 for designing. However, the files should be compatible
with the latest Eagle available. Cad Soft offers a trial version of their software that allows you to
inspect schematics and board files (without being able to modify them).
This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License.
To view a copy of this license, visit
http://creativecommons.org/licenses/by-sa/3.0/
.
If you are looking for a schematic of an older revision of the board and it isn't available at our web
site you may request it by the support e-mail.
8.2 Physical dimensions
Note that all dimensions are in inches.
Note that the iMX233-OLinuXino-NANO board has a 6-layer PCB. The three highest elements on
the board in order from the tallest to the shortest are: vertical USB HOST – 16.2mm (0.640'') over
the pcb; UEXT connector – 13.6mm (0.525''); U_DEBUG pins – 12.0mm(0.464'').
The heights listed above include the PCB height.
Page 33 of 36
