OLIMEX AVR-ISP500, Руководство пользователя, Страница: 2 / 12

INTRODUCTION:
AVR-ISP500
is USB low cost in-system programmer for AVR
microcontrollers. It implements the STK500v2 protocol as defined by Atmel
which makes it compatible with a range of tools, including
AvrStudio
and
avrdude
.
There are two ways you can use AVR-ISP500
FEATURES:
- Fully STK500v2 compatible;
- Works with AvrStudio, WinAVR, Avrdude and every other software
compatible with STK500v2;
- USB port for connection to PC;
- One bi-color LED for current operation status;
- Supports both standard Atmel ICSP10 and ICSP6 layout connectors;
- Powered by USB;
- External clock output on ICSP10 pin 3 for rescuing AVRs with enabled
external clock fuse;
- Supports target voltages ranging from 1.8V to 5.5V.
- ISP clock frequencies ranging from 5kHz to 2MHz.
ELECTROSTATIC WARNING:
The AVR-ISP500 must not be subject to high electrostatic potentials.
General practice for working with static sensitive devices should be applied
when working with this board.
REQUIREMENTS:
Cables:
1.8 meter USB A-B cable (not supplied with the programmer)
Software:
- AvrStudio, available from Atmel.
- avrdude, included in the WinAVR distribution.
- Any other software with support for the STK500v2 protocol.