OLIMEX© 2018
A20-OLinuXino-MICRO user's manual
Recommended items:
- External USB hub – to split the USB_HOST mounted on the board; you need that to connect more
USB devices
- External power supply unit – (7-24)V DC
, 5W(10V @ 0.5A) required – for optimal power;
- USB-SERIAL-CABLE-F – for Android/Linux debugging on UART0
- CABLE-IDC40-15cm – cable used for LCD_CON ↔ Olimex LCD display
- Adapter cable for the 6-pin VGA connector to standard VGA 15-pin connector
Additional items include:
- Audio device for HEADPHONES jack
- Ethernet cable for wired Ethernet
- A number of extension modules that can add functionality or interface to the board on the UEXT
connector; these can be explored here:
https://www.olimex.com/Products/Modules/
Some of the above-suggested items can be purchased by Olimex, for instance:
SY0612E –
reliable power supply adapter 50Hz (for EU) 12V/0.5A for A20-OLinuXino-MICRO
SY0612E-CHINA
– cheaper power supply adapter 50Hz (for EU) 12V/0.5A for A20-OLinuXino-
MICRO
A20-Android-SD
– a tested class 10 micro SD card with the latest (by the time of leaving the
Olimex facilities) official Android release
A20-Debian-SD
– a tested class 10 micro SD card with the latest (by the time of leaving Olimex
facilities) official Debian Linux release
USB-SERIAL-CABLE-F –
USB serial console cable female
USB-MINI-CABLE –
standard USB type A to USB type mini cable
A20-VGA-CABLE
– adapter from 6-pin connector to 15-pin one
CABLE-IDC40-15cm
– cable for LCD to LCD_CON connection
LCD-OLinuXino-4.3TS
– low-cost 4.3'' LCD display with touchscreen component – 480×272
LCD-OLinuXino-7TS
– low-cost 7'' LCD display with touchscreen component – 800×480
LCD-OLinuXino-10TS
– low-cost 10.1'' LCD display with touchscreen component – 1024×600
LCD-OLinuXino-15.6
– low-cost 15.6'' LCD display with touchscreen component – 1024×600
LCD-OLinuXino-15.6FHD
– low-cost 15.6'' LCD display with touchscreen component –
1920×1080
SATA-HDD-2.5-500GB
– 5GB 2.5'' SATA hard disk
SATA-CABLE-SET
– cables that allow the connection of a 2.5'' hard disk to the board
ALUMINIUM-HEATSINK-20×20×6MM –
heatsink radiator for better processor heat dissipation
2
For boards revision J or newer; the voltage applied to the power jack should be (6-16)V for older board revisions
Page 9 of 56
