OLI EASY DISPLAY Скачать руководство пользователя страница 4

Страница: 4 / 16

GENERAL INFORMATION

01_OED_OLI_00_EN

OLI EASY DISPLAY

1.3.

MANUFACTURER

Our company is at your disposal for any problem or information. Communications and

requests can be sent to:

OLI eBike Systems

Via delle pesche, 891 - 47522 Cesena - (FC) -ITALY

Tel +39 / 0547 / 318322

[email protected]

www.oli-ebike.com

For any need concerning the use, maintenance or request for spare parts, please

specify the unit identification data shown on the manufacturer's plate.

1.4.

DESCRIPTION

OLI EASY DISPLAY is an HMI unit that allows you to analyse and view the data relating

to the e-bike and the training in progress. The unit is composed of a sturdy injected-

moulded ABS body where an LCD display and buttons are placed that allow for control

and navigation.

CAUTION:

The OLI EASY DISPLAY unit is intended exclusively for use as an HMI on

e-bikes. Uses other than those foreseen and not compliant with what is described

in this manual, in addition to being considered improper and prohibited, can create

dangerous conditions for people and things.

IMPORTANT:

The manufacturer declines all responsibility for improper use of the

product.

Содержание EASY DISPLAY

















Результаты поиска

Содержание EASY DISPLAY

Отзывы:

Похожие инструкции для EASY DISPLAY

Бренды по названию

Популярные бренды

OLI EASY DISPLAY, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание EASY DISPLAY

Отзывы:

Похожие инструкции для EASY DISPLAY

Бренды по названию

Популярные бренды