CHANGING CRANK HANDLE FROM LEFT TO RIGHT OPERATION
STEP 1:
Loosen grub screws from locking collar on leg
B
.
STEP 5:
Fit the hex drive assembly into the drive socket on leg
A
.
STEP 2:
Slide out crank handle and shaft.
STEP 6:
Fit hanger bracket screws and tighten.
STEP 3:
Remove hanger bracket screws to release the assembly.
STEP 7:
Slide in crank handle assembly.
STEP 4:
Slide the hex drive assembly out of the leg.
STEP 8:
With crank handle fully retracted, push the locking collar
hard against the furthest bearing on the hanger bracket and
tighten grub screws.
STEP 9:
Test operation.
B
A
A
A
B
B
