Radio Kit with Onboard I/O
–
User Guide
14
9.
INSTALLATION
A.
Outdoor Installation
1.
Install or use existing NEMA-type enclosure.
2.
Be sure the WIO® System meets applicable grounding
requirements in the enclosure.
3.
Install a 35 mm x 7.5 mm DIN rail inside the enclosure.
4.
Mount WIO Radio Module onto the DIN rail.
5.
Install antenna at least 10 ft above ground (performing a RF site survey prior to installation is
highly recommended).
There are various types of antennas including bulkhead, omni, and yagi. Please use the
appropriate type for your application.
6.
Connect Antenna to Radio Module using appropriate high quality, low loss antenna cables.
7.
Connecting a lightning arrestor between Radio and Antenna is strongly recommended.
8.
Run wires through the bottom of the enclosure and be sure to weather seal any openings.
9.
Connect signal wires to the Radio Module.
10.
Supply power to the Radio Module: 9-30 Vdc.
11.
Repeat above steps for other Radio Module location.
