Oldham MX 43, Руководство пользователя, Страница: 51 / 67

7 – Menus 51
Table 14: Relay and logic input file messages.
4. Working conditions records
This displays the actions carried out on the MX43 (simulation mode, calibration
mode, programming mode, release request, operation on internal battery), as well
as the date and time of beginning and end of the event.
Delete allows for the deletion of this entire monitoring file. Up to 512 events can
be memorized. Beyond that, the the most recent event deletes the oldest.
Previous page, Next page, and Last page allow access to the corresponding
pages of the file; each page can display a maximum of 8 lines.
Message Significance
Lines On/Off Start or stop the line
Detectors On/Off Start or stop the detector
External ack Press the external acknowledgement button
MX43 ack Acknowledgement by the acknowledgement button on the front face of
MX43
Simulation Switch to simulation mode
Calibration At least one of the detectors is selected in calibration mode.
Test detectors Switch to test mode
Program Programming done on MX43
Time settings Time settings on MX43
Line 1 On/Off Start or stop line 1
Line 2 On/Off Start or stop line 2
Line 3 On/Off Start or stop line 3
Line 4 On/Off Start or stop line 4
Line 5 On/Off Start or stop line 5
Line 6 On/Off Start or stop line 6
Line 7 On/Off Start or stop line 7
Line 8 On/Off Start or stop line 8
Table 15: Operation monitoring file messages.
5. Hardware troubles records
This displays, for each material incident detected: incident ID, status (activated =
ON or deactivated = OFF) as well as the date and time of occurrence or release of
the event.
Previous page, Next page, and Last page allow access to the corresponding
pages of the file: each page can display a maximum of 8 lines.
Message Significance
DEAD Digital module no longer responding (line cut, module failure, wrong address,
module absent).
MODUL Configuration or module address error.
TEMP+ Internal temperature of the MX43 higher than maximum tolerated value.
TEMP- Internal temperature of the MX43 lower than maximum tolerated value.
BAT Switching to external power supply.
LINE 1 Incident on line 1 (short-circuit).
LINE 2 Incident on line 2 (short-circuit).