Page
5
OPERATION INSTRUCTIONS
1.
Press the power switch
ON
and allow the machine to run for 1-2 minutes.
Note: If
the machine begins to vibrate excessively, turn the Power Switch to OFF. Unplug the machine and make
sure
it’s
on a level working surface.
2.
Press the heating controller switch
ON
. Allow the machine to heat up for 4-5
mi
nutes
.
3. Empty
one spoon of granulated su
gar
or cotton candy sugar mix into the
floss
head.
CAUTION: THE FLOSS HEAD SPINS AT ULTRA-FAST SPEEDS AND IS
HOT.
DO NOT TOUCH THE FLOSS HEAD. DO NOT ADD MORE THAN ONE
SCOOP OF
SUGAR MIX.
4.
After approximately 30 seconds, cotton candy will begin to appear in the
pan.
Note:
Keep all jewelry and loose clothing away from the spinning floss head.
5.
Insert the open end of the cotton candy cone, or candy stick gently into the
cotton candy. Spin the cotton candy onto the cone in a counter-clockwise
direction, twisting the cone as you go. Pull up slowly, while still rolling the
cotton candy onto the cone until the desired portion has been reached.
6.
Continue creating cones until all the sugar has been removed from pan.
There is no need to preheat the machine to start a second batch if done
immediately after the first. Note: Failure to spin off excess sugar may increase
the likelihood of smoke or burned sugar on next use.
IMPORTANT! Rest the machine 20 minutes after 60 minutes of continuous use.
7.
Turn the machine
OFF
, unplug and allow cooling completely before touching.
Remove pan, wipe clean with a damp cloth and dry thoroughly. Avoid using
excessive water when cleaning.
Содержание SPIN1400
Страница 1: ...SPIN1400 INSTRUCTION MANUAL...
