¼" x 3"
Connector Bolt
Step 3
Step 4
Tools Needed:
Tools Needed:
Attach crib spring (H) to metal insert with four ¼" x 1" connector bolts and lock washers using Allen wrench
provided. Small springs should be at top to support crib mattress. See figure 4. There are three metal inserts
for height adjustment of crib spring.
Note:
Crib spring should be lowered as child grows to discourage
child from trying to climb out.
DO NOT fasten the bolts all the way until you have completed
step 4
Attach small posts (D) to ends of front panel (C) with four ¼" x 3" connector bolts
and lock washers as shown in figure 2, making sure to center panel on posts. Turn
connector bolts snug. The word “inside,” located on bottom rails, should be on the
inside of the crib..
Now tighten crib spring bolt.
(4) ¼" x 3" Connector Bolt
Allen Wrench
(C)
Front Panel
Short Post (D)
Short Post (G)
I
nstructIons
for
A
ssemblIng
c
Astlebury
c
rIb
I
nstructIons
for
A
ssemblIng
c
Astlebury
c
rIb
(G)
Short Post
(D)
Short Post
Pivot Arms
¼" x 1"
Connector Bolt
(H)
Crib Spring
Metal Inserts
(4) Lock Washer
¼" x 3"
Connector Bolt
CAUTION:
ANY MATTRESS USED IN THIS
CRIB MUST BE AT LEAST 27¼" BY 51
/ " WITH
A THICKNESS NOT EXCEEDING 6 INCHES.
5
8
Your crib is now ready for bedding.
(4)
¼
" x 1"
Connector Bolt
(4) Split
Lock
Washer
Allen Wrench
