Before using a remote control
Connecting the input devices
Button type lithium battery (CR2025) has already been inserted into the remote control.
Before using, pull out the insulation sheet as follows.
Replacing the battery of the remote control
Please replace the lithium battery (CR2025) as shown below.
Connecting the speakers
Connect speakers to the speaker terminals of the main unit.
1.Peel the protective covering of the speaker cables
approximately 0.4 inch for both left and right speakers,
and twist the cable cores firmly.
2.Insert the cable core through the connection hole
of each speaker terminal and tighten the knob.
R
L
COAX
OPT
USB
LINE
INPUT
DC IN
SPEAKER
R
L
COAX
OPT
USB
LINE
INPUT
DC IN
SPEAKER
Insulation sheet
Speaker(R)
Speaker(L)
Speaker code
(not supplied)
Loosen
Tighten
USB cable (supplied)
Optical cable (not supplied)
Ster
eo mini cable (not supplied)
RCA audio cable (not supplied)
RCA coaxial cable (not supplied)
Optical digital output
(OPTICAL)
Coaxial digital output
(COAXIAL)
Analog audio output
(LINE OUT)
Digital audio output devices
Digital audio output devices
CD player/
Portable audio devices
Computer
4
5
The speaker terminals support the use of banana plugs.
If the cable is difficult to connect because of,for example,
too thick, please use the banana plug (not supplied) that
is compatible with the cable.
Tips
Keep pressing in the direction of
①
,
and pull out in the direction of
②
.
Insert the battery with the Indication of +
facing upward.
Approx.
0.4 inch
Notes
・
Connect speakers with impedances of 4
Ω
and over. Protection circuit may work,
if connecting speakers with impedances of less than 4
Ω
.
・
Connect speakers so that the neighboring cable cores do not touch each other.
USB input terminal (USB)
Connect a USB port of the Computer and the USB terminal of the main unit with the
supplied USB cable.
Optical digital audio input terminal (OPT)
Input the digital audio through a device with the optical digital audio output terminal
(toslink square type).
Coaxial digital audio input terminal (COAX)
Input the digital audio through a device with the coaxial digital audio output terminal.
Analog audio input terminal (LINE)
Input the analog audio through a device with the line output terminal using a mini stereo
audio cable. When the line output terminal of an analog audio output device is the RCA
analog audio terminal, connect with a cable of stereo mini male to 2 RCA stereo male jack.
