English
Stud Gun EPK-6,5, EPK-8
OKU Tools GmbH, 70374 Stuttgart, Germany
8
EN
5.2 Faults during insertion
5.2.1 Studs inserted to deep
Reduce the pressure applied on the gun during insertion.
5.2.2 Studs jut out off the tire
Put more pressure onto the gun when inserting the studs.
5.3 Conversion of machine gun to manual gun
If you are using a studding machine (AS-ZN, EP-ZN or EPK-ZN) and want to disman-
tle the gun from the base frame to use it manually you’ll firstly have to convert the
gun, i.e. to release the trigger:
Disconnect the gun from the compressed air supply.
Release trigger:
Slip off O-ring (26) from bushing (28) and dowel pin (25) appears.
The dowel pin can be easily pushed out of the bore. The trigger (26) is now released
and can be removed. Turn the trigger by 90° and insert it back into the bushing. Then
insert the dowel pin into the bore of the bushing. Slip the O-ring over and place it into
the groove.
The gun must be set back to its initial state should you want to use it
on the studding machine.
Bushing (28)
Dowel pin (25)
O-ring (26)
Trigger (24)
O-ring (26)
Bushing (28)
Trigger (24)
Dowel pin (25)
Images similar
