4345-E P-12
SECTION 3 REPORT INFORMATION DISPLAY
•
CUTTING
Length of time for which an axis has been moved at a cutting feedrate [hours:minutes:seconds]
Length of time an axis has been moves at a cutting feedrate in the machine lock mode or dry
run mode (NC lathe) is not counted.
•
CYCLE TIME
Length of time for which power has been ON for producing one piece of workpiece [hours:min-
utes:seconds/pc.]
(Cycle time = Power on time (RUNNING) / No. of workpieces (NO. OF WORK))
•
MACHINING
Length of operating time used for producing one piece of workpiece [hours:minutes:seconds/
pc.]
(Machining time = Operating time (RUNNING) / No. of workpieces (NO. OF WORK))
Operating Report
The report shows the operating status of the machine.
Machine operating report:
•
RUNNING
Length of time for which power supply to the NC has been ON [hours:minutes:seconds]
(Power ON (RUNNING) = OPE NOT OPERATNG)
•
OPERATING
Length of time for which a main program has been executed
Length of time the main program has been executed in the machine lock mode or dry run mode
(NC lathe) is not counted.
(OPERATING = C Not cutting)
•
CUTTING
Length of time for which an axis has been moved at a cutting feedrate [hours:minutes:seconds]
Length of time an axis has been moved at a cutting feedrate in the machine lock mode or dry
run mode (NC lathe) is not counted.
•
NOT OPERATNG
Length of time for which a main program has not been executed
(NOT OPERATING = IN-PRO SETUP + NO OP PART W MAINTENANCE
+ OTHER)
•
IN-PRO SETUP
Constituent of not-operating time: machine has not been operating due to in-process setup.
•
NO OPERATOR
Constituent of not-operating time: machine has not been operating due to no operator atten-
dance.
•
PART WAITING
Constituent of not-operating time: machine has not been operating due to waiting for workpiece
to be machined.
•
MAINTENANCE
Constituent of not-operating time: machine has not been operating due to machine mainte-
nance.
•
OTHER
Constituent of not-operating time: machine has not been operating due to reasons not classified
into the items indicated above.
•
SPINDLE RUN
Length of time for which the spindle has been rotating
Length of time the spindle has been rotating in the machine lock mode is not counted.
