English
Stud Gun EP-8, EP-9, EP-10
3 Technical Data
3.1 Stud types
The gun can be used for the insertion of single-flange and multi-flange studs
into car tires. Factory setting is for the insertion of single-flange studs.
To operate the gun with multi-flange studs you’ll be needed to convert the gun
(not possible for EP-10). Exchange the separating finger (20) of the single-
flange studs for the provided separating fingers of the multi-flange studs, as
described in chapter 6.7.
Type
ID.-No.
Stud sizes
EP-8 (gun for manual use)
100192
Ø8 from a length of 11 mm
Multi-flange studs with a Ø8 and a
length of 10 mm can be inserted
with gun EPK-8 only.
EP-8 (gun for machine)
101758
EP-9 (gun for manual use)
100193
Ø8 from a length of 11 mm
Ø9 from a length of 11 mm
EP-9 (gun for machine)
100262
EP-10 (gun for manual use)
100194
Single-flange studs with an Ø10,
Ø9 from a length of 13 mm only.
EP-10 (gun for machine)
100263
3.2 Dimensions and weight
The following values are valid for the gun without any accessories and can dif-
fer according to the respective extra equipment.
Length
ca. 282 mm
Width
ca. 60 mm
Height
ca. 194 mm
Weight
ca. 1,8 kg
OKU GmbH, 73650 Winterbach, Germany
8