English
Stud Gun EP-12, EP-15
1 Preface and general information
1.1 General
The operating instructions is used for safe operation of the Stud Guns (in the
following referred to as “gun“) type Automatic Stud Gun EP-12 and EP-15 (ID-
No. 100264, 100265)). The safety instructions included hereinafter must be
observed.
The operating instructions must be available for anybody who is working with
the gun and the included instructions must be carefully attended to.
The operating instructions must always be complete and perfectly readable.
1.2 Scope of supply
The delivery normally consists of a stud gun, the operating instruction and 1
separating finger for multi-flange studs fingers (only EP-8 and EP-9). The
parts included in your delivery are stated in the accompanying papers.
These papers shall be checked for conformity, immediately after receipt of the
goods. OKU Systems GmbH & Co. KG does not provide any guarantee and/or
accept any liability for defects complained belatedly.
Therefore:
•
Contact the forwarder immediately to complain visible transit dam-
ages.
•
Contact OKU Systems GmbH & Co. KG immediately to complain
visible defects and/or incompleteness of delivery.
1.3 Intended use
The gun is intended to be used only for the insertion of single and multi-flange
spikes into tyres of trucks.
Any other use shall be deemed to be inappropriate!
OKU Systems GmbH & Co. KG, 73650 Winterbach, Germany
3
