d
O K p h o n e , L L C M O D E L 5 2 4 S A B O P E R A T I O N S M A N U A L
Page
4
524
USB CONNECTION with a PC
1.
First step is to determine which COM port the
524
will be communicating over.
Power down the
524
and do not connect the USB cable yet. Start the PC serial application
program
TERA TERM
. Choose SETUP on the MENU bar, Choose the PORT drop down
box to see which ports are available BEFORE connecting the USB cable. Write down the
current ports. Press the CANCEL button and EXIT the
TERA TERM
program.
2.
With the
524
still powered down, plug in the USB cable from the PC to the
524
and allow
Windows to initialize the USB buss.
3.
Re-Start the serial application program
TERA TERM
, choosing SETUP as in STEP 1. and click
PORT to choose the new COMx port
(this port wasn’t included in step one) that will be used for
communication between the
524
and the CPU.
4.
Plug in the
524
and allow it to initialize, RED/GREEN leds will flash, with solid RED indicating
the initialization is over.
5.
Press the ESC key on the keyboard of the CPU and the message (
…RESET) should be
displayed.
6.
The 3 DIGIT PASSKEY needs to be entered before any programming can commence.
7.
Contact OKphone for initial PASSKEY, this is in the format (#xxx). In other words press
the # key and follow with 3 digits. The programming Parameter sheet delivered with the
DEMO equipment contains the default passkey.
8.
Press “
DD
” to
D
isplay
D
ata.
9.
Reference SAT/SAB Programming Parameters v1.60 for setup of
Model 524
.
