OKP K2, Инструкция по эксплуатации

Страница: 26 / 28

25
�.Troubleshooting
/�.� Wi-Fi Connection
Before Wi-Fi setup, make sure Robot, mobile phone, and Wi-Fi network meet the following requirements.
Robot and Mobile Phone Requirements
·Robot is fully charged and the power switch of Robot is turned on.
·Robot is ready for network setup.
·Turn off mobile phone's cellular data (you can turn it back on after setup).
Wi-Fi Network Requirement
·You are using a �.�G Hz or �.�/� GHz mixed network.
·Your router supports ���.��b/g/n and IPv� protocol.
·Do not use a VPN (Virtual Private Network) or Proxy Server.
·Do not use a hidden network.
·WRA and WPA� using TKIR PSK, AES/CCMP encryption.
·WEP EAP (Enterprise Authentication Protocol) is not supported.
·Use Wi-Fi channels �-�� in North America and channels �-�� outside North America (refer to local regulatoryagency).
·If you are using a network extender/repeater; the network name (SSID) and password are the same as your primary
network.