7
4
Supplied equipment
1
Controller.
Dual channel temperature controller. See pointer 1 in Figure 1.
2
T Sensor.
Fine gauge immersible thermocouple, which can be used to calibrate the heating devices
connected to the Controller and to meter temperature, as needed. See pointer 2 in Figure 1.
3
Power feeder and power cord.
24V DC-60 W power feeder. See pointer 3 in Figure 1.
4
MINI-USB-OTG.
Mini USB OTG cable to connect a USB drive to the H401-T-CONTROLLER for data
download. See pointer 4 in Figure 1.
5
Alarm screw terminal.
Contact closure alarm. See pointer 5 in Figure 1.
4
3
1
2
5
Figure 1. H401-T-CONTROLLER
–
Components.
5
Optional Equipment
1
DATA LOG
(Optional-to be purchased separately)
.
It is a program that allows to use in tethered mode or
to log any Okolab device using a PC.
Figure 2. DATA LOG software.