H301-NIKON-NZ100/200/500-N
User Manual
Rev 03
www.oko-lab.com
Pa
ge
6
1
2
3
Sliding Lid
A
A
Screws M2x4
Figure 4. Assembly of the sliding lid
3.2
Koehler Lid
The Koehler Lid is a heated glass lid reducing
the chamber’s height to 22 mm and allowing imaging under Koehler il-
lumination. The Koehler Lid is placed onto the chamber (NO SCREWS or TOOLS are necessary).
Figure 5 shows chamber dimensions with Koehler lid (with and without chamber riser).
Distance between focal plane
and upper side of the glass
lid without the chamber riser
Distance between focal plane
and upper side of the glass
lid with the chamber riser
Chamber top view
H301-KOEHLER LID
Figure 5. H301-NIKON-NZ100/200/500-N + H301-KOEHLER-LID
3.3
Injection Lid
The Injection Lid is a heated glass lid with two small openings sealed with flexible plastic allowing injection or perma-
nent access to the sample. NOTE: Compatible with sample holder 1x35 ONLY. The Injection Lid is placed onto the
chamber (NO SCREWS or TOOLS are necessary).
Figure 6 shows chamber dimensions with the Injection Lid (with and without chamber riser).