Okolab H201-NIKON-TI-S-ER Скачать руководство пользователя страница 8

Страница: 8 / 17

H201-NIKON-TI-S-ER

User Manual

August 2019

www.oko-lab.com

Insertion of the Sample Feedback Temperature Sensor

Insert the Sample Feedback Temperature Sensor through the dedicated opening located in the H201-NIKON-TI-S-ER

(see Figure 8, Front and 3D views).

1.Frontal view

2.3D view

Temperature Sensor dedicated opening

Figure 8. Insertion of the temperature sensor inside the chamber.

Insertion of Sample Holder into Chamber

Sample holders fit into the chamber base and are held in place by magnets embedded within both chamber and hold-

er. To introduce a sample holder with the proper orientation, match the red dot on the holder to the one on the

chamber base, as illustrated in Figure 9.

Insert the adapter by

superimposing the red points

Figure 9. Introduction of the Specimen Holder inside the Chamber Base.

Содержание H201-NIKON-TI-S-ER


















Результаты поиска

Содержание H201-NIKON-TI-S-ER

Отзывы:

Похожие инструкции для H201-NIKON-TI-S-ER

Бренды по названию

Популярные бренды

Okolab H201-NIKON-TI-S-ER, Руководство пользователя

Результаты поиска

Содержание H201-NIKON-TI-S-ER

Отзывы:

Похожие инструкции для H201-NIKON-TI-S-ER

Бренды по названию

Популярные бренды