OKM FS Future GeoSeeker Mini, Руководство пользователя

Страница: 45 / 52

Analyzing a Measurement 45
The resistivity value is the basis of further calculations concerning underground water deposits and
cavities.
If you want to keep the measure values for later calculations, reports or other uses, you have to write it
down. You can not access these values later.
7.2 Interpretation of graphical representations
After completing a measurement you can also generate a 2d graphic of the measured values. The
graphic is representing the ground resistivity values in different colors, as shown in figure 7.2, to
highlight potential places of very high and low conductivity. The color's meanings are:
• Blue: This color indicates a high conductivity and a low resistivity as typical for underground
water deposits.
• Yellow / White: This color indicates a medium conductivity and resistivity as typical for normal
underground soil.
• Red: This color indicates a low conductivity and a high resistivity as typical for underground
cavities or impervious layers.
After conducting a measurement you will also get some kind of depth estimation. Please keep in mind
that the indicated depths are maximum depths only. In most cases the indicated depth is often higher
than the real depth might be but it will give you a rough estimation where the objects of your desire may
be.
OKM GmbH
www.okmmetaldetectors.com
Figure 7.2: Graphical 2d representation of a measurement